K93400 Friction Tester
Evaluates the dynamic friction at reciprocatory contacts of dry or lubricated materials as the function of normal load, velocity, frequency, temperature, and time. A wide variety of materials including fluid lubricants, greases, cutting fluids, metals, composites, ceramics, polymers, and coatings can be tested. The test is conducted by pressing the test specimen against a ball, pin, or cylinder undergoing reciprocating linear motion, producing a sinusoidal velocity profile which allows for the monitoring of static and dynamic friction force over a wide range of linear sliding speeds. The test load, stroke, frequency, and temperature can be adjusted to simulate different conditions. The frictional force developed at the contact interface is measured by a piezoelectric force transducer equipped with a charge amplifier. The test results can be displayed and recorded on a storage oscilloscope or acquired on a PC with the TriboDATA acquisition software for evaluation. Wear analysis of the sample can also be evaluated with a profilometer.

Specifications
Normal Load: 5-50N
Frequency: 1-50Hz
Stroke: 0-10mm (1-10Hz)
0-5mm (10-20Hz)
0-2mm (20-50Hz)
Temperature Range: ambient to 100°C
Test Duration: 0.1-999 min

Included Accessories
Set of Weights
Test Specimen Holders
Ball Sample
Pin Sample
Set of Hands Tools
Electronic Controller
Fuses
Connecting and Signal Cables
TriboDATA Software
Calibration and Test Reports

Shipping Information
Shipping Weight: 264 lbs (120 kg)
Dimensions: 25 Cu. Ft.